VMO VISOR V4 (15GR) - 3D-PRINTED SHIELD - CORONAVIRUS COVID-19
VMO VISOR V4 (15GR) - 3D-PRINTED SHIELD - CORONAVIRUS COVID-19
Published 2020-04-21T16:10:12+00:00
VMO VISOR V4, Apr 2020
Protection visor easy to print and resistant
(Visera de protección fácil de imprimir y resistente)
INSTRUCTIONS (Instrucciones):
https://youtu.be/gi7PAh1TBmY
1- Print the included model, as you choice (Imprima el modelo elegido)
2.- Mark the holes for screws over the clear sheet plastic (Marque los huecos en el acetato)
3.- Make a three holes on the clear sheet (Haga las tres perforaciones)
4.- Insert the three screws, to fix the clear sheet.(Inserte los tres tornillos para fijar el acetato)
FOUR MODELS INCLUDED (Cuatro modelos incluidos):
LIGHT: (Only 15 gr)
Height: 8mm
VISOR V4-8mm.STL
STD: (18 gr)
Height: 10mm
VISOR V4-10mm.STL
PLUS: (27 gr)
Height: 15mm
VISOR V4-15mm.STL
GO PRO: (20 gr)
Height: 10mm
VISOR V4-GP.STL
NEED (Se necesita):
220 to 280 Micron Clear Acetate Sheets A4 (Acetato Transparente A4)
Screws (Tornillos): M3 x 4mm, 3 units
Elastic: 18 - 20 cm
Support me (Apoyarme):
https://www.patreon.com/user?u=32471655
VIDEOS:
FILTER TEST: https://youtu.be/lrQWaV4bhJ8
MASK SEAL: https://youtu.be/bpcbeetAats
VISOR: https://youtu.be/gi7PAh1TBmY
DESIGNS (Diseños)
VISOR V1:
https://www.thingiverse.com/thing:4244384
https://cults3d.com/en/3d-model/various/vmo-visor-v4-15gr-3d-printed-shield-coronavirus-
covid-19
DECATHLON MASK ADAPTOR (Adaptador Mascara)
https://www.thingiverse.com/thing:4279946
https://cults3d.com/en/3d-model/various/vmo-decathlon-mask-adaptor-and-fit-3m-filter-3d-
printed-protective-coronavirus-covid-19
MASK V3 (Mascara V3):
https://www.thingiverse.com/thing:4251943
https://cults3d.com/en/3d-model/various/vmo-mask-v3-coronavirus-covid-19-improved-
version
https://www.myminifactory.com/object/3d-print-117089
SURGICAL MASK STRAP (Tensor para Mascaras Quirúrgicas):
https://www.thingiverse.com/thing:4267364
https://cults3d.com/en/3d-model/various/vmo-ss-surgical-mask-strap-coronavirus-covid-19
SURGICAL MASK SEALER (Sellador para Mascaras Quirúrgicas):
https://www.thingiverse.com/thing:4264890
3D PRINTING SETTINGS
Layer Height: 0.28mm
Speed: 50 mm/s
NOZZEL: 0,8mm
Line width: 1mm
Time: LIGHT: 37min - STD: 45min - PLUS: 1h 28min - GP: 49min
NOZZEL: 0.4mm
Line width: 0,5mm
Time: LIGHT: 56 min - STD: 1h 7min - PLUS: 1h 41 min - GP: 1h 13min
Date published | 21/04/2020 |