Premium Stock

MWO Catapult 3D Printing Model | Assembly + Action

(20)
cm: 17.25 w x 14.9 d x 25.7 h
in: 6.791 w x 5.866 d x 10.118 h

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 4 and Version 5 are the new files for Catapult MWO 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • Version 1 STL files on FDM/FFF 1.0 3D printers - old version with old joints;
  • Version 2 STL files on FDM/FFF 2.0 3D printers - old updated version;
  • Version 3 STL files on FDM/FFF 3.0 3D printers - new version with new scale and new joints;
  • Version 4 STL files on FDM/FFF 3.1 3D printers - new version of knee joints;
  • Version 5 STL files on DLP/SLA/SLS 1.0 3D printers - new version with new scale and new joints.
File Name File Size Time / Filament Object Size
(x/y/z mm)
G (repaired).stl
0.42 MiB 30 min <1 m 53 x 12 x 21 Download
LL_2 (repaired).stl
4.53 MiB 6 h 54 min 4 m 38 x 87 x 56 Download
LL_3 (repaired).stl
4.15 MiB 4 h 2 min 2 m 29 x 73 x 39 Download
LL_5 (repaired).stl
0.36 MiB 19 min <1 m 19 x 19 x 10 Download
LL_6 (repaired).stl
0.45 MiB 33 min <1 m 27 x 27 x 9 Download
LR_2 (repaired).stl
4.53 MiB 6 h 54 min 4 m 38 x 87 x 56 Download
LR_3 (repaired).stl
4.15 MiB 4 h 1 min 2 m 29 x 73 x 39 Download
LR_5 (repaired).stl
0.36 MiB 20 min <1 m 19 x 19 x 10 Download
LR_6 (repaired).stl
0.45 MiB 33 min <1 m 27 x 27 x 9 Download
ML_1 (repaired).stl
8.23 MiB 15 h 19 min 10 m 45 x 72 x 75 Download
ML_4 (repaired).stl
0.60 MiB 31 min <1 m 23 x 23 x 11 Download
MR_1 (repaired).stl
8.23 MiB 15 h 20 min 10 m 45 x 72 x 75 Download
MR_4 (repaired).stl
0.60 MiB 31 min <1 m 23 x 23 x 11 Download
T_2 (repaired).stl
3.97 MiB 8 h 49 min 5 m 66 x 65 x 38 Download
T_4 (repaired).stl
1.58 MiB 4 h 35 min 3 m 39 x 41 x 46 Download
T_5 (repaired).stl
3.99 MiB 2 h 39 min 2 m 48 x 49 x 45 Download
T_6 (repaired).stl
3.99 MiB 2 h 40 min 2 m 48 x 49 x 45 Download
LL_4 (repaired).stl
0.68 MiB 29 min <1 m 17 x 17 x 33 Download
LR_4 (repaired).stl
0.68 MiB 29 min <1 m 17 x 17 x 33 Download
T_1 (repaired).stl
6.97 MiB 8 h 13 min 4 m 68 x 59 x 54 Download
T_3 (repaired).stl
7.23 MiB 17 h 53 min 10 m 76 x 67 x 122 Download
LL_1 (repaired).stl
2.03 MiB 5 h 37 min 3 m 55 x 90 x 37 Download
LR_1 (repaired).stl
2.03 MiB 5 h 37 min 3 m 55 x 90 x 37 Download
ML_2 (repaired).stl
0.81 MiB 1 h 37 min 1 m 39 x 51 x 17 Download
MR_2 (repaired).stl
0.81 MiB 1 h 37 min 1 m 39 x 51 x 17 Download
ML_3 (repaired).stl
0.45 MiB 25 min <1 m 8 x 56 x 8 Download
MR_3 (repaired).stl
0.45 MiB 25 min <1 m 8 x 56 x 8 Download
...

Version 1

Mech Warrior Catapult 3D model is a fictional combat vehicle that is extremely popular among the gamers fanbase due to the increased popularity of the video game itself. The action takes place in a BattleTech universe, with robotic vehicles taking part in battles. Players are free to customize their battle warrior as the game progresses. The fact that makes the game so interactive is that the player can add more powerful weapons and equipment to its large bipedal combat vehicle. This heavy warrior is known to hold the enemy far by raining down fire from its blistering amount of missile.

This MWO 3D print model for printing features all the game graphics, but with the 3D modeler’s own approach to the design. It consists of two arms, 1 mech module slot, 2 weapon module slots and 2 consumable module slots. The model is fully movable with articulated arms and legs. 2 missile launchers are positioned to the left and right of the warrior’s torso. The torso of our 3D model twists at 360°.

The assembly 3D model consists of 27 parts. The largest part is 90mm long/wide. All parts are no more than 122mm tall and designed to fit 18*19cm print bed. The model is optimized to be printed on all types of 3D printers: SLA/SLS and FFF. It is a High-Poly model made up of 741506 polygons, creating an accurate surface detailing.

The 3D printable files are available in STL file format. They have been thoroughly checked in Netfabb and have been created in CURA 15.06 and Repetier Host. All files measure 72.7MB.

Size of 3D printed MWO Catapult 

The size of the model in assembly form is 143mm deep, 176 mm wide, and 250mm tall. The 3D modeler spent more than 100 hours to design this BattleMech Catapult model to perfection.

Buy Catapult 3D model for printing. Hit the “Buy” button; provide your PayPal account or credit card information at checkout and download one of the most accurately designed 3D models of Catapult battle warrior.

Bring the BattleTech universe into the real world with the Catapult 3D print model! 

Version 2

We optimized and upgraded Mech Warrior Catapult 3D model as follows:

  1. All articulations have been modified, to ensure greater workability of the model.
  2. Torso has undergone several design modifications, to facilitate mounting of weapon add-ons which are available for download.
  3. Cabin has a new look now, featuring a front nose.
  4. The foot pedals have been made articulated as well. 
  5. The upgraded Mech Warrior Catapult 3D model consists of 36 parts, as compared to the previous one, which was made of 27 parts.

Read the detailed description of the upgraded MWO 3D model, with pictures and tips about assembling. 

Update 20.07.2016: The articulation mechanism for the Catapult joints has undergone some new modifications. Click HERE to see it and read how to assemble it correctly.

On 26.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

Version 3,4

On 01.11.2017 new scale and new version of joints have been added.

 

Now, the 3D Model of Catapult is available in two scale: 1/60 for Version 3 (FDM/FFF) and 1/100 for Version 4 (DLP/SLA/SLS).

There are 36 parts in Version 3 (FDM/FFF) and 8 parts for Version 4 (DLP/SLA/SLS).

Version 3 (FDM/FFF):
- Is 1:60 scale and after being printed will stand 257 mm tall, 172.5 mm wide, 149 mm deep;
- Made with new joints;
- All movable elements of the Mech were saved.

Version 4 (DLP/SLA/SLS):
- Is 1:100 scale and will stand 167 mm tall, 106 mm wide, 88 mm deep;
- Made with new joints;
- All movable elements of the Mech were saved;
- Has as few details as possible to keep printing costs down.

With new joints from Version 3 and Version 4 you will get next advantages:
1. Increases frictional force;
2. Possible to up scale or down scale the whole model;
3. Printable from any type of material;
4. Higher strength;
5. Material shrinkage does not affect at strength and friction.

STL files with new scale and new joints are already available for download in “Source files” tab for:
- Version 3 - STL files on FDM/FFF 3D printers;
- Version 4 - STL files on DLP/SLA/SLS 3D printers.

Watch the tutorial video on how to assemble Catapult MWO 3D Printing Miniature at Gambody YouTube channel

________________________

On 21.09.2018 new knee joints have been added.

Now the Catapult 3D model has new, more durable knee joints to improve the model’s stability. They reliably fix and allow changing the model’s pose. Due to the improved durability, the joints do not wear off because of frequent changes in the model’s pose. The new knee joints are simpler to print and better fit the overall design and appearance of the model. They are also completely replaceable, and you don’t have to reprint the whole model to replace one of these parts.

Now this model contain parts of Locks. One part of Lock (37_Ge_lock_10H_(x4)) you need to print 4 times.

STL files with new joints are already available for download in “Source files” tab FFF/FDM 3.1 Version.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Note:

- You can print new joints from Version 3 and Version 4 with 20-30% infill. 
- With the new joints from Version 3 and Version 4 you can up scale or down scale the whole model.

- All parts of connectors should be printed at 100% infill.

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90Ëš
    Minimum Skin Width for Expansion: 0.0

Material
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 45°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2 mm
Support Z Distance: 0.2 mm
    Support Top Distance: 0.2 mm
    Support Bottom Distance: 0.2 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings