A modern fruit bowl that can be printed as separate parts and then assembled by hand.
Print Settings | Setting |
Walls | 2 |
Layer Height | 0.2mm |
Nozzle | 0.4mm |
Material | Any filament will work (I used marble PLA) |
Infill | 15% |
Supports | No |
Other | Its press fit but if you want it to be permanent then just add some glue inside the edges of the base before pressing the rib in. |
I recommend to print one base part and then a rib to make sure they fit nicely. Sizing has been tested on a calibrated Bambu X1C and an Ender 3 S1 and for both of those no scaling was needed. You can scale the base size a % accordingly to make the fit more or less tight depending on you specific needs. (don't scale the arms)
Note: If there is an interest in different sized base plates/arms or a base plate with more of less slots for the arms let me know and I will add some new versions. The current v1 uploaded version has 28 arms but if you have larger fruit only like apples for instance or similar objects then a version with less arms will work fine.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.