Keychain or Dragon Spinner and Display by k2thestank

k2thestank

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.24mm layer, 4 walls, 10% infill

Designer

17.2 h

6 plates

5.0(1)

Boost

115

162

279

Released

Description

PDF

Supporters Version now Online and includes these over the Basic version

access to more options and design customizations
direct help from me if you require any additional addons (within Reason)
some STEP files for personalization
MY DIRECT APPRECIATION for helping me fund more designs and prototypes for the community

Easy to print Keychain and Display Pegboard Hook Holder

Premade supports for the Bottom you can either remove them or keep them as part of the sealed base its up to you!

Uses standard 1" spacing /w 6mm hook diameters

Hollow bottom for you to add weights like BB's or Pellets (supports included in design)

Hardware needed:

x2 M3 Heat inserts or 1/2" Screws per Spinner bottom
Pellets or BB's
2.5x1mm Zip Ties
10 or 12x3 or 10 or 12x4 magnet (top cap for price tag options)
1" Wood doweling (height is up to you but recommend no more then 2 stacks tall)
1" spacing hooks x 5.4mm or less pegs (recommended to not go longer then 6")

Base has a Diameter of 154mm (6")

3D PRINTING SETTINGS

Voron Spec: (Recommended)

4/4 Top/Bottom
4 or 5 walls
20-25% infill

Minimum Settings:

4/4 Top/Bottom Layers
3 walls
10% Infill

This is the basic version, for extra parts or new addons they will only be available through the Paid version of Printables, Cults3D or Patreon

If you enjoy these designs please consider purchasing the files off Cults3D or buying me a coffee as every dollar gets put back into more designs and creations!

Comment & Rating (6)

@user_3444422081

Boosted

this is such a great item! my son had his first show today and this holder worked so well! we did need to use a 7/8” dowel and burr out just a little of the spinner top/bottom rings, but that was no big deal and it worked like a dream and looked very professional. some of the pure 3D printed ones just look like they will break at any second, this one was very sturdy. we did take the supports out and filled it with bb’s (the Daisy 2400 pack was the perfect amount) and then snapped it into the larger base add on for wind/tipping.

The designer has replied

@k2thestank

I'm so glad you enjoyed it, you described the exact reason i made this design!

@dcgfpower

plis upload the chibi dragons plis or mini

The designer has replied

@k2thestank

those are from cinderwing3D you'll have to get them from her

@NilsN3DP

Print Profile

0.24mm layer, 4 walls, 10% infill

great print and. good profile!

@noobinator.0

Now this is a must need what brand of pegs did you use.

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.