(Note: So far this model is a prototype, we have not been able to test the model with the screws yet, the screws should fit and hold in place, but there is a chance that they might not. In case of any problems please leave me a comment or a message and I'll make the corrections)
This is an accurate adaptation of the real attachment from the game. I optimized for real-world dimensions = for a picatinny rail and standardized screws. If you like the model please consider giving a like and a rating or sharing it with others, feel free to follow me on social media under @bigmikemw
You will need M2.5 screws and nuts (detailed in the bill of materials). I recommend choosing components with flat heads for this model, screws (DIN 84 recommended) with length of at least 22mm and head diameter less than 5mm
Diameter | Head/Cap diameter | Length | Amount needed | |
Screw | M2.5 | <5mm | 22-24mm [flat head] | 2x |
Nut | M2.5 | - | Flat | 2x |