Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: 😁😀
PLA BambuLab Basic Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions: 😁😀
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #16 (1.36mm) swap to Jade White for the rest.