Palmeiras FC Standphone or Tablet Holder

Hello friends, as requested by a friend, via private messages, I have relizzato this wonderful project, dedicated to the football team Palmeiras FC.

The standphone is quite robust, it supports all smartphones, several tablets.

Everything is interlocking, each piece is divided, so you can print the desired color, without using acrylic colors.

Size and print examples can be found in photos.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

Layer 0.10 / 0.15
Temp 205° / 50° PLA --- 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
No support
Speed 50/60 mm/s