V 5.0 Just released. Biggest update so far. Now almost 20.000 files included!. Biggest is the newly added support for Fixed dividers. Really useful if you have half full trays or pull out a lot of cards during play Also added support for Trible trays. I made a small video showing the trays: youtube.com/watch?v=SKie4Nf8cAY&ab_channel=CyrexTableTop and a BGG Post about AT:o: https://boardgamegeek.com/thread/2998363/storage-box-using-standard-3d-printable-components

MTG box with dividers

Based on Input From mr. Hansen, I have just doubled the number of dividers, Now all dividers exist with and without a cutout in top to ease card removal when the trays are almost full!

Printet with the divider with the cut out.

Version 9 is out! I increased the number of "insert boxes", now they go from 10mm to 50mm in steps of 5 mm. The picture below is from my Deckbox object, but the "insert boxes" are similar. This shows a 10mm box, which is usefull here to hold just a few tokens for Dungeon Mayhem

Just updated to Version 10. This version includes dividers with different tolerances. This way you can control the "tightness" of the fit of the dividers. I added this because I think the dividers were a bit too loose to my taste! - Now you can choose what you want!. Tolerance "0" is the default and similar to version 9 dividers. To test, I printed a massive tray, with 3 rows of 245mm. It can take 1500 Sleeved cards in a single tray - Pretty nice! This leaves room for more player cards in Arkham horror :-) Let me know if you have challenges with the tray, or want me to include or expand something !

Yeah!! Version 11 is finally ready ! Containing more than 100.000 STL files! Biggest upgare are: * Rounded corners on all trays / Boxes * Interference fit lid, with 9 different fit possibilities * Much better file structure * Document describing how to select the file you want. Find the document here: https://drive.google.com/file/d/1eeVbLKzilFc9vEW9urEbjJsEb0cBjPfQ/view?usp=sharing

Just a small Picture showing the lid finish using my new PEO build plate

A potential buyer suggested I made support for Index cards used in schools etc. They are size 3x5in. I thought that was a good idea! So now we are very close to 150.000 STLs in this object! Below is a test print, I printed a landscape double version. Unfortunately I had a layer slip or something. But other vice the test was successful. However I do not have any of these index cards my self, so if anyone uses these, please print and share - and naturally if there is issues, I will fix it. I made space for sleeves as well, which I think may not be needed ?

Just added support for Terraforming Mars, the dice game - card sizes. I also did a very fast solution to fit all of that game into one tray and wrote a small BGG post on it, You can see that post here, if you are interested: https://boardgamegeek.com/thread/3162097/3d-printed-storage-solution Below are a few pics.

Wow ! Version 13 is now out! This object now contains more than 150.000 STL files :-) Compared to the initial version only ~6 months ago, this is becoming really cool I think :- ) After playing some games Terraforming Mars TDG, it became apparent that the "full size" boxes were too high to be convenient. I could simply have printed some of my Token trays, but for smaller games like this, I kind of like just printing the Card tray and some boxes, So I have included the option of having "half height" boxes. I also increased the maximum box width from 50 mm to 100mm in strides of 5mm. Each card size now have approximately 15000 STLs each. - Should I break up this object into card trays for specific cards ? anyways, have fun. :-)

Just did a storage solution for Skytear Horde. Here I used a combination of fixed and "free" dividers, That worked really well I think. For the tokens I used my Anysize Tokenbox. I picked same length and height as the Card tray, that may be a little too big, but then its easy to pick up the tokens. ***************** Almost all of my prints are done using Sunlu PLA. I think Sunlu PLA is good quality at very low cost. If you use the below link or this coupon code:"RMPWN5TJHE", You get 5% discount and I get a little as well. sunlu.com?sca_ref=4223994.rmpwN5tJHe

Version 13.1 just released. This provides quarter sized boxes for tokens and stuff. Also, for the first time I use the trays for storing minis... You can see my bgg post here, where I use it for Deliverance. https://boardgamegeek.com/thread/3189466/3d-printed-generic-insert also, here are a short video of the same: https://youtu.be/t3Iksky0D38 and of cause some images as well

More than half a million STL files ! I made a new document to navigate the files - its easy! Here is the link: https://drive.google.com/file/d/13orOk56p7jdJBdRezdribznygWZeWlkE/view?usp=sharing The reason this object went above half a million files is because I just double the number of files twice, due to two cool new options. 1) All card boxes are now available in sleeved and un-sleeved versions - for those wanting to save a little space, time and plastic - and do not use slaved cards. 2) Now all card boxes come in two overall versions. With and without cut outs. Before this update, the fixed divider boxes had no cut out to fix the dividers. If you do not need the card boxes to be super sturdy - this is a good and nice option! I still use the no cut-out version to "stand a lone" card boxes, like Magic and Arkham LCG. but plan to use these inside game boxes. ISS Vanguard will be the first trial using these. I have just not received it yet!

Just release a small update containing support for 80x120 sized cards. These are used in ISS Vanguard. I have made a small video showing how I use these trays to store ISS Vanguard. https://youtu.be/h8gu_vdC-ds

Yeah! Version 15 is out! The new documentation can be found here: https://drive.google.com/file/d/15WJ_WEN3JQUC3SRpCg1U1uHZRsa-hSLQ/view?usp=drive_link This release has focus on the dividers, introducing two new improvements. 1) All trays now exist in 3 versions, with 3 different excess height: 1mm, 5mm, 10mm. The previous release only had 1mm and10mm. The 5mm version seems like a good compromise if you do not need huge labels. This was inspired by the dividers for IIS vanguard, that were approximately 5mm taller than the cards. 2) Dividers now support a side cut out. This is cool if you want to add text to the dividers and still need the cutout. The middle cutout simply leaves a little to little space for a decent label. Hope you like it, let me know if you have questions or issues with the files.

Ok! , I did not see that coming - 1.9 million STL files in one object! . A user (mitchM) Suggested to add lids with different heights, essentially to be able to enclose the "cutout" versions of the trays. This is a good idea, because then you get the full protection of the cards, while still having easy access to the cards during gameplay. I thought it was a good idea, so I started creating those files. What did not expect was the number of files this generated! Because I the lids comes with many different clearance values - to be able to get a personalized fit. This object now contains almost 1.9 million STL files :-) I wonder if this is more than all other files on MMF ? I have structured the files "intelligently" and created this document to assist finding the right files, so it should be quite easy ! https://drive.google.com/file/d/1SoiSIJ9K2MAI6jb7DDpbG2XFgh6Xn_Zb/view?usp=drive_link Anyways, Thanks Mitch for the idea! - keep them coming. And as always, these updates are free for people having bought access, even when I choose to increase the price due to added functionality !