EspaΓ±ol/Spanish:
Regarding printing parameters you have to take into account that this design has been made with the idea of making color changes during printing. I have designed this print with the idea of printing with a layer height of 0.2mm. Regarding perimeters and infill I leave it to your choice, mine was 2 perimeters and 5% gyroid infill. If you want to print the file that includes the phrase, you must add a horizontal expansion of 0.1mm for the graduation cap to come out correctly.
Below I detail the height at which you should make each of the layer changes.
The first color you should use is the color you want the slate to have, in my case it is green up to the height of 2mm.
The second color you should use is the color you want the letters to be, in my case it is white and it should go up to the height of 2.8mm.
The third color you should use is the color you want the teacher's dress to have, in my case I chose blue and it should go up to the height of 3.6mm.
The fourth color you should use is the color you want the teacher's skin color to be, in my case I chose a flesh color and it should go up to the height of 4.4mm.
Finally, the color you should use is the color you want the border of the board, the hair, eyes and mouth of the teacher as well as the border of her silhouette to be and it should go up to the height of 5.2mm.
For the model that does not have letters, you must add them to your choice with the letters of your choice and I recommend that you give them a height of 2.8mm.
English/English:
Regarding printing parameters, you have to take into account that this design has been made with the idea of making color changes during printing. I have designed this print with the idea that it will be printed with a layer height of 0.2mm. Regarding perimeters and padding, I leave it to your choice, mine was 2 perimeters and 5% gyroid padding. If you want to print the file that includes the phrase, you must add a horizontal expansion of 0.1mm for the graduation cap to come out correctly.
Below I detail the height at which you must make each of the layer changes.
The first color you should use is the color you want the board to have, in my case it is green up to a height of 2mm.
The second color that you must use is the color that you want the letters to have, in my case it is white and it must go up to a height of 2.8mm.
The third color that you must use is the color that you want the teacher's dress to have, in my case I chose the color blue and it should go up to the height of 3.6mm.
The fourth color that you must use is the color that you want the teacher's skin color to have, in my case I chose a flesh color and it should go up to a height of 4.4mm.
Finally, the color you should use is the color you want the edge of the blackboard, the teacher's hair, eyes and mouth to have, as well as the edge of her silhouette, and it should go up to a height of 5.2mm.
For the model that does not have letters, you must add them to your choice with the letters that you want and I recommend that you give them a height of 2.8mm.