BOWIE The Goblin King by SPARX 3D print model
As many fans will know, Toy is the lost album that Bowie recorded in 2000 with his live band following his triumphant Glastonbury performance, so in honour of the release of the album this month and to honour one of my greatest music hero’s I sculpted this model of Bowie from the movie Labyrinth, even though his appearance in the whole film was a total of ten minutes . . the role just suited Bowie perfectly . . . .
The Custom Licence is NOT royalty Free, the STL or Models created by your purchase may NOT be sold. The licence is for personal use only.
The model is1/6 scale at H310 x W120 x L120 With base (just below the 1/6th scale as my shelves are 315mm spacing!)
1 head 1 right arm 1 separate crop 1 base 1 right boot
As some of the options are tubed to hold wires for the globe LED’s. 2 upper torso’s options 4 lower torso’s 3 left arms 2 Left Boots
16 items in total.
Should you not want to light with LED use the “pinned” parts.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
Why cut into many smaller parts I have been asked?
- If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
- Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
3D PRINTING SETTINGS TIPS: Resin Printing;
Do not Hollow Raft 98% Tubed Left Arm, Tubed Left Boot Rest of parts; Hollow 2.40 Raft 98%
FDM Rest at 0.16 30% fil, l speed 50
ALWAYS dry assemble and “trim” parts prior gluing. assemble tubed parts after painting and thread wires for LED as assembling model . . Assemble lower torso and boots to base to help align the model.
Similar Models
