Turboprop Engine, for Business Aircraft, Cutaway
$10.00 Turboprop Engine, for Business Aircraft, Cutaway
Published 2018-09-21T09:06:37+00:00
This is a model of the Turboprop Engine for Business Aircraft, etc.
Engine of this class has many features other than the large size jet (fan) engine.
- Smaller size
- Higher RPM
- Lighter weight
These features make the complex air flow and configuration.
There are two types of this class engine;
- Direct drive
This cutaway model is the direct drive type imaging TPE331 and, etc.
- Free turbine
Features of this model are;
①. Integral-type Reduction Gear Box with an Air Intake
②. High Ratio Reduction Gears (including Planetary)
③. 2 stages Centrifugal Compressor (Impeller)
④. Reverse Flow Combustion Chamber
⑤. Axial stage Turbine
⑥. For the bearings (BRG), the printable dummy BRG are prepared to reduce cost instead of the metal ball bearing.
Download files includes;
-files: STL Files (44 items)
STL file name: "ws" of last 2 digits means "With Support" which special designed.
-images: Parts Breakdown for assembly Aid
-Excel (Zip) File: Parts List
Purchase Parts Information;
-Aluminum Tubes
See Parts List
-Screws
Micro screws M1.4x3.5L - Appox. 45 ea - Direct screw-in to 1 mm dia hole (No nut)
Screws M2 x ** - See Parts List
Assembly Points
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
- If you want to clarify the air flow passage, the back side surfaces are painted before glueing and/or assembly.(See Photos)
Total Net Print Time: Approx. 40HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Especially, Input-Housing101ws.stl needs about 10 hours to print.
Note: When at actual print, each parameter may be adjusted by your experience.
3D printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
But the parts having gear, small shaft and thin portion: 100% infill is recommended.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
I do hope your success!!
【Optional Parts】 Rotational Stand for Turboprop Engine Cutaway
Additional rework
If there is not made the slot of 02-119 AL Tube aft end, please make a slot for turning.
STL files (6 files)
- See photo.
Purchase parts
- AL Tube and Piano Wire and Wood plate: See photo.
- Wood Screws: Appropriate screws can be used.
Assembly Points
- STL parts position will be adjusted by the model you made.
3D printing settings
- No special requirement.
[Update 2022.02.18]
"Prop-Shaft-Stop01" added
"assy-charts01" revised
[Update 2024.03.06]
"assy-charts01-3" added to correct typo error of "assy-chart01-2.
"Assy-Manual-TPE02" newly added.
See above
Date published | 21/09/2018 |
Price | $10.00 |
Material Quantity | See above |
Technology | FDM |
Complexity | Easy |