Land yacht propeller / Char a hélice
Land yacht propeller / Char a hélice
Published 2017-08-29T16:02:37+00:00
Here is a vehicle between yachting and airboat
On the video you can watch the chariot that sometimes jumps, is when it encounters a small stone
There are 2 engine mounts which one is 15 ° inclined to master the jumps of the tank which are caused by small stones
The propeller from the project: http://www.thingiverse.com/thing:1346080
For steering and wheel spindles you will find parts of yachting
- PLA Realization
- Layer thickness of 0.2mm - 1mm shell thickness
- Filling 30%
- Temperature 220C °
- Support everywhere
- The two square tubes are aluminum 10x10mm length 250 mm
- The engine NTM Prop Drive Series 28-26A 1200kv (short shaft view)
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=39314
- The servo used for management is a 9 grams
http://www.hobbyking.com/hobbyking/store/__662__HXT900_Micro_Servo_1_6kg_0_12sec_9g.html
- The 3S LiPo battery 11.1V 1300mA
- The wheels come from skating
- The white sheath pin and serves to guide the steering linkage is 4mm
-- Char à voile à hélice
Voici un véhicule entre le char à voile et l'airboat
Sur la vidéo vous pouvez observer le char qui saute parfois, c'est lorsqu'il rencontre une petite pierre
Vous trouverez 2 supports moteurs dont un est de 15° incliné pour maitriser les sauts du char qui sont provoqué par les petites pierres
L'hélice vient du projet : http://www.thingiverse.com/thing:1346080
Pour la direction et les axes de roues vous retrouverez des pièces du char à voile
- Réalisation en PLA
- Epaisseur de couche de 0.2mm - épaisseur de coque de 1mm
- Remplissage 30%
- Température 220C°
- Support partout
- Les 2 tubes carres sont en aluminium de 10x10mm d'une longueur de 250 mm
- Le moteur NTM Prop Drive Series 28-26A 1200kv (short shaft version)
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=39314
- Le servo utilisé pour la direction est un 9 grammes
http://www.hobbyking.com/hobbyking/store/__662__HXT900_Micro_Servo_1_6kg_0_12sec_9g.html
- La batterie lipo de 3S 11.1V 1300mA
- Les roues viennent de roller
- La gaine blanche qui sert de goupille et de guide pour la tringlerie de direction est de 4mm
Date published | 29/08/2017 |
Technology | FDM |
Complexity | Medium |