FDM .stl pack
The FDM model has the following parts
- barrel
- gun mount (2 pieces)
- gun pedestal (2 pieces)
- trail A – you need to print 3
- trail B – you need to print 2
- trail foot pads – there are 5 to be printed
A successful FDM print requires this to be printed with .1mm layers with supports. Care must be taken in removing supports. The “T” shaped portion of the gun mount fits into the second part as so –
The trail foot pads fit into a recess at the end of the trail. The barrels snaps into the gun mount horizontal post. Test fit before gluing.
Resin .stls
The .stl pack for resin printing contains the following files
- barrel
- gun mount
- pedestal
- Trail A – you need to print 3
- Trail B – you need to print 2
I included the standard .stls plus a folder with the same .stls with supports added. While those files worked for me, your printer may have alternate parameters, and you may prefer to apply the supports yourself.
Reviews
There are no reviews yet.