DINOSAURS PACK 2
$10.00 DINOSAURS PACK 2
Published 2021-12-21T11:38:30+00:00
- ACROCANTOSAURUS
- AUSTRORAPTOR
- COMPSOGNATHUS
- CRYOLOPHOSAURUS
- DIMORPHODON
- GALLIMIMUS
- KENTROSAURUS
- MEGALODON
- MOSASAURUS
- PACHYCEPHALOSAURUS
- PSITTACOSAURUS
- PYRORAPTOR
- SHANTUNGOSAURUS
- SPINOSAURUS
- SUCHOMIMUS
- THEMATIC BASE 1
- THEMATIC BASE 2
- TUPANDACTYLUS
DINOSAURS MINIATURES SCALE 32mm
ALL FILES HAVE THE PRINTING SUPPORT OPTION
DISCLAIMER:
We cannot guarantee that printing with our supports will work with every printer and resin combination out there. However, if you discover a profile that works for a printer and resin combination that we do not have listed here, we would be grateful if you submitted it to us for inclusion in future submissions.
If you do need assistance getting these prints to work, please do not hesitate to contact us. We would be happy to help you.
SUPPORTS:
All supports are created using Lychee Slicer. The lychee files for all models are provided to you in case you need to make adjustments for the prints to work on your printer & resin setup.
https://mango3d.io/downloads/
Lychee slicer is a free slicer that you can download and use for hollowing or addition additional supports.
Note that if you wish to use its advanced features, you’ll need to purchase a Pro license.
PRINTERS:
We print using Anycubic Mono and Mono X printers. These are current generation monochrome printers. Our supports should work using printers with color screens but will require longer exposure times. We have included a profile below which should work with most older printers with some minor adjustments.
RESIN:
* Monocure 3D Rapid Model Resin - https://monocure3d.com.au/product-category/rapid-resin/
* Anycubic Craftsmen Resin - https://www.anycubic.com/collections/uv-resin/products/craftsman-resin
PROFILES:
Note: If your printer is struggling with Vroom and the tips below don’t help, try the Slow n Steady profile.
**Anycubic Mono**
Resin:
Monocure 3D Rapid Model Resin
Exposure Time: 2.8s
Anycubic Craftsmen Resin
Exposure Time: 2.5s
- Vroom
Lift Height: 5mm
Lift Speed: 6mm/s
Lowering Speed: 5mm/s
- Slow n Steady
Lift Height: 5mm
Lift Speed: 0.4mm/s
Lowering Speed: 5mm/s
**Anycubic Mono X**
Resin:
Monocure 3D Rapid Model Resin
Exposure Time: 1.8s
Anycubic Craftsmen Resin
Exposure Time: 1.8s
- Vroom
Lift Height: 8.5mm
Lift Speed: 6mm/s
Lowering Speed: 5mm/s
- Slow n Steady
Lift Height: 8.5mm
Lift Speed: 0.5mm/s
Lowering Speed: 5mm/s
Last Gen Profile:
**Anycubic Photon S**
Resin:
Monocure 3D Rapid Model Resin
Exposure Time: 8s
- Slow n Steady
Lift Height: 5mm
Lift Speed: 0.5mm/s
Lowering Speed: 5mm/s
TIPS:
FEP Tension – Your FEP should be tensioned using an empty vat and a spectrum analyzer app on your phone. Search for some youtube vidoes on how to do this if you aren’t sure.
Anycubic Mono X Tension: 180-200Hz
Anycubic Mono: 280-300Hz
Hollowing – We provide lychee files which have the hollowing and holes pre-configured for models we feel need to be hollowed. That is to say, not all models should be hollowed. However, should you wish to add hollowing to a model which has not been configured this way, you can simply do so in the lychee file.
Date published | 21/12/2021 |
Price | $10.00 |
Support Free | YES |