Cyclops Bust
$8.00 Cyclops Bust
Published 2021-06-02T10:10:58+00:00
Hi everyone this is our first bust, the mighty cyclops devouring an unlucky toxote. Be carefull with the post-processing of the model, on the printing details we left some tips to cure the model given by @Lady_executioner, who also support the miniature.
If you like the model, please print & paint it and then share it on your social media tagging us (@gamesmythology) that would help more people to meet us and in addition we will be able to enjoy your work! thanks in advance!
32mm wargaming scale for historical & fantasy wargames. Also usefull for D&D, rol games or just to enjoy painting it.
You can download the STL with or without supports. Let us know what you think and share your painted minis with us if you want us to post it on our social media.
If you want to have a 25% discount in all our shop objects you just have to become a member of our tribe and we will make a discount code for you! (up to 2 per month)
(Tribe link: https://www.myminifactory.com/users/GamesMythology?show=tribe)
Learn more here: www.gamesmythology.com
See you on the battlefield!
* Join here to our army of 3d printing lovers for only 3$/month.
(Link: https://www.myminifactory.com/users/GamesMythology?show=tribe)
* Suscribe to our newsletter and get free miniatures every month!
(Link: https://mailchi.mp/ef723db794d1/free-miniature)
You can download the STL with&without supports. Let us know what you think and share your painted minis with us if you want us to post it on our social media.
English:
POST-PROCESSING OF THE MODEL
- remove from the printing plate
- remove supports without starting. The model contains SMALL PARTS that could break when removing the brackets. It is recommended to use pliers and cut the ends of the supports flush with the surface of the model.
- clean the model.
It is a HOLLOW MODEL, so you have to make sure that there is no liquid resin left inside.
- immerse the model in isopropyl alcohol (for normal resins) for at least 3 minutes (observe that bubbles come out of its interior to confirm the entry of the liquid into the model)
- remove the model from the alcohol; a second wash in clean alcohol is recommended
- Remove the model from the alcohol and immerse it in water for no less than 5 minutes. If oily stains are observed in the water, we can say that the model still contains liquid resin inside. Repeat the alcohol washes
- let the model dry well with the drain hole facing down so that it drains well
- Before curing, make sure that the model is completely dry to avoid calcifications and crystallizations on the surface of the model.
- cure
Español:
POST-PROCESADO DEL MODELO
- retirar de la placa de impresion
- quitar soportes sin arrancar. El modelo contienen PIEZAS PEQUEÑAS que podrian romerse en quitar los soportes. Se recomienda el uso de tenacitas y cortar los extremos de los soportes a ras de la superficie del modelo
- limpiar el modelo.
Se trata de un MODELO HUECO, por lo que hay que asegurarse que en su interior no queda resina líquida.
- sumergir el modelo en alcohol isopropilico (para resinas normales) durante al menos 3 minutos (observar que salen burbujas de su interior para confirmar la entrada del liquido dentro del modelo)
- retirar el modelo del alcohol; se recomienda un segundo lavado en alcohol limpio
- retirar el modelo del alcohol y sumergirlo en agua no menos de 5 minutos. Si se observa manchas aceitosas en el agua podemos afirmar que el modelo aún contiene resina liquida en su interior. Repetir los lavados con alcohol
- dejar secar bien el modelo con el agujero de evacuación hacia abajo para que drene bien
- antes de curar asegurarse que el modelo está completamente seco para evitar calcificaciones y cristalizaciones sobre la superficie del modelo
- curar
Date published | 02/06/2021 |
Price | $8.00 |
Support Free | YES |