Pack flork

Keychains of 80 models of "FLORK" stickers.

The outline protrudes from the figure. You can print it in two colors by pausing your print and changing the filament.

Each "flork" is a different STL.

Modifications: Updated 1 flork ("timido 1") that had different heights than the others.

Compared to other models on the web, these designs are ready to be printed without problems since they were tested so that there are no fragile areas:

*The size of the eyes has been increased so that they are not tiny and come off when they rub against another object.

*The thickness of the arms and contours have been checked so that they are not too thin.

*A base height of 1.5mm (white part) and a contour height (black part) of 1.5mm were placed, obtaining a total height of 3mm, which makes a resistant piece and allows a correct change of color during the Print.

*The height of 3mm allows the resistance of fine contours.

*The 3mm height of the key chain holder allows for strength and durability for the user.

Recommendation:

1) To make the color change we recommend first printing one or two layers of the outline in white, and then switching to black.

2) Printing in 2.0 quality is sufficient so that there are no errors in critical areas (eyes, eyebrows, etc). The speed will depend on the accuracy of your printer, in our tests we used a speed of 50.

quality: 2.0

infill: 100%

supports: no