Red Mage's Wild Rose Rapier

Dangerous Ladies' 3D models for the Wild Rose Rapier.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Finishes at 46". Pre-sliced for printing on a 200mm tall bed. I've included whole versions of the blade and dragon for those who prefer to slice it themselves, too.

The dragon prints separately, and includes a textured and untextured version, depending on your printer quality and personal preference. The textured version is a bit finickier and has some finer edges that some printers struggle with, but the effect is cool

The dragon mounts to the blade using 1/4" dowels or acrylic rods cut 1" in length; the clear acrylic rods are a bit prettier but not necessary by any means.

The sword assembles on a 40.5" long rod, 1/4" diameter. I suggest using aluminum for strength, but wood is fine too.

If you wanted to scale the whole prop, you could print everything at 150% to get a 69" long sword, using a 3/8" rod cut 60.75" long. That's pretty large but also... consider how cool huge swords are :)

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

We print using 0.15mm layers, 1.2mm walls, a 12% infill, at 40mm/sec.