Skip to content

STREET BASHER 3D PRINTED RC CAR 1/7

image-2.webp STREET BASHER 3D PRINTED RC CAR 1/7
front.webp STREET BASHER 3D PRINTED RC CAR 1/7
image-3.webp STREET BASHER 3D PRINTED RC CAR 1/7
angle.webp STREET BASHER 3D PRINTED RC CAR 1/7
Ε‘Ε‘.webp STREET BASHER 3D PRINTED RC CAR 1/7
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.5k views
  • 29 likes
  • 198 downloads
  • 3 comments
License
Usages
3D design format
2 files (STL and ZIP) Close
  • Fit_test.stl
  • StreetBASHER_V1.3.zip
    • CAD/StreetBASHER_Assembly_V1.3.step
    • STLs/Body Roll Cage/Back_Bottom_L.stl
    • STLs/Body Roll Cage/Back_Bottom_R.stl
    • STLs/Body Roll Cage/Back_Cage.stl
    • STLs/Body Roll Cage/Back_Roof.stl
    • STLs/Body Roll Cage/Back_Top_L.stl
    • STLs/Body Roll Cage/Back_Top_R.stl
    • STLs/Body Roll Cage/Front_bumper_bottom.stl
    • STLs/Body Roll Cage/Front_bumper_holder_L.stl
    • STLs/Body Roll Cage/Front_bumper_holder_R.stl
    • STLs/Body Roll Cage/Front_bumper_L.stl
    • STLs/Body Roll Cage/Front_bumper_R.stl
    • STLs/Body Roll Cage/Front_bumper_top.stl
    • STLs/Body Roll Cage/Hood_panel.stl
    • STLs/Body Roll Cage/Mud_Guard.stl
    • STLs/Body Roll Cage/Roof.stl
    • STLs/Body Roll Cage/Roof_Panel.stl
    • STLs/Body Roll Cage/Side_L.stl
    • STLs/Body Roll Cage/Side_R.stl
    • STLs/Center drive/Center_brace_holder.stl
    • STLs/Center drive/Center_diff_bottom.stl
    • STLs/Center drive/Center_diff_top.stl
    • STLs/Center drive/Center_diff_top_cover.stl
    • STLs/Center drive/Motor mount/Motor_support_mount_1.stl
    • STLs/Center drive/Motor mount/Motor_support_mount_2.stl
    • STLs/Center drive/Motor mount/Motor_support_mount_3.stl
    • STLs/Electronics/Battery_tray_L.stl
    • STLs/Electronics/Battery_tray_R.stl
    • STLs/Electronics/Ele_cover.stl
    • STLs/Electronics/ESC WP-8BL150/Ele_box_body_WP8BL150.stl
    • STLs/Electronics/ESC WP-8BL150/On_Off_switch_holder_WP8BL150.stl
    • STLs/Electronics/Fan_shroud.stl
    • STLs/Electronics/No screw ESC/Ele_box_body_ESC.stl
    • STLs/Front suspension/Differential/Diff_body.stl
    • STLs/Front suspension/Differential/Diff_cover.stl
    • STLs/Front suspension/Differential/Diff_sway_bar_cover.stl
    • STLs/Front suspension/Front left arm/Ball_Lock_x2.stl
    • STLs/Front suspension/Front left arm/Front_arm_bottom_L.stl
    • STLs/Front suspension/Front left arm/Front_arm_Top_L.stl
    • STLs/Front suspension/Front left arm/Front_hub_L.stl
    • STLs/Front suspension/Front left arm/Tie_rod_M4_1.stl
    • STLs/Front suspension/Front left arm/Tie_rod_M4_2.stl
    • STLs/Front suspension/Front right arm/Ball_Lock_x2.stl
    • STLs/Front suspension/Front right arm/Front_arm_bottom_R.stl
    • STLs/Front suspension/Front right arm/Front_arm_Top_R.stl
    • STLs/Front suspension/Front right arm/Front_hub_R.stl
    • STLs/Front suspension/Front right arm/Tie_rod_M4_1.stl
    • STLs/Front suspension/Front right arm/Tie_rod_M4_2.stl
    • STLs/Front suspension/Front_arm_holder_front.stl
    • STLs/Front suspension/Front_arm_holder_rear.stl
    • STLs/Front suspension/Front_center_brace_holder.stl
    • STLs/Front suspension/Front_tower.stl
    • STLs/Front suspension/Shock_adapter_1_2x.stl
    • STLs/Front suspension/Shock_adapter_2_2x.stl
    • STLs/Front suspension/SwayBar/Sway_bar_joint_x2.stl
    • STLs/Front suspension/SwayBar/Sway_bar_link_x2.stl
    • STLs/Front suspension/Top_arm_holder.stl
    • STLs/Front suspension/Top_plate.stl
    • STLs/Chassis/Center_body.stl
    • STLs/Chassis/Front bumper/Center_Front_bumper.stl
    • STLs/Chassis/Front bumper/Front_body_brace_1.stl
    • STLs/Chassis/Front bumper/Front_body_brace_2.stl
    • STLs/Chassis/Front bumper/Front_body_brace_insert.stl
    • STLs/Chassis/Front bumper/Front_spliter.stl
    • STLs/Chassis/Front_body.stl
    • STLs/Chassis/Front_brace.stl
    • STLs/Chassis/Rear diffuser/Rear_difuser_body.stl
    • STLs/Chassis/Rear diffuser/Rear_wing_brace_L.stl
    • STLs/Chassis/Rear diffuser/Rear_wing_brace_R.stl
    • STLs/Chassis/Rear_body.stl
    • STLs/Chassis/Rear_brace.stl
    • STLs/Rear suspension/Differential/Diff_body.stl
    • STLs/Rear suspension/Differential/Diff_cover.stl
    • STLs/Rear suspension/Differential/Diff_sway_bar_cover.stl
    • STLs/Rear suspension/Rear Left Arm/Rear_arm_L.stl
    • STLs/Rear suspension/Rear Left Arm/Rear_hub_L.stl
    • STLs/Rear suspension/Rear Left Arm/Tie_rod_M5_1.stl
    • STLs/Rear suspension/Rear Left Arm/Tie_rod_M5_2.stl
    • STLs/Rear suspension/Rear Right Arm/Rear_arm_R.stl
    • STLs/Rear suspension/Rear Right Arm/Rear_hub_R.stl
    • STLs/Rear suspension/Rear Right Arm/Tie_rod_M5_1.stl
    • STLs/Rear suspension/Rear Right Arm/Tie_rod_M5_2.stl
    • STLs/Rear suspension/Rear_arm_holder_front.stl
    • STLs/Rear suspension/Rear_arm_holder_rear.stl
    • STLs/Rear suspension/Rear_brace_holder.stl
    • STLs/Rear suspension/Rear_tower.stl
    • STLs/Rear suspension/Shock_adapter_1_2x.stl
    • STLs/Rear suspension/Shock_adapter_2_2x.stl
    • STLs/Rear suspension/SwayBar/Sway_bar_joint_x2.stl
    • STLs/Rear suspension/SwayBar/Sway_bar_link_x2.stl
    • STLs/Steering/Left_shaft_arm.stl
    • STLs/Steering/Right_tower_lower.stl
    • STLs/Steering/Right_tower_upper.stl
    • STLs/Steering/Servo_joint.stl
    • STLs/Steering/Servo_saver_to_link.stl
    • STLs/Steering/Servo_saver_top.stl
    • STLs/Steering/Steering_center.stl
    • STLs/Steering/Steering_shaft_x4.stl
    • STLs/Test and help/Fit_test.stl
    • STLs/Test and help/Front_ball_insert_helper.stl
    • STLs/Test and help/Rear_ball_inser_helper.stl
    • STLs/Test and help/Wrench.stl
    • STLs/Wing/Side_wing_L.stl
    • STLs/Wing/Side_wing_R.stl
    • STLs/Wing/Wing_body.stl
    • STLs/Wing/Wing_mount.stl

Learn more about the formats
Last update 2024-02-28 at 01:10
Publication date 2023-12-31 at 01:49
Design number 1677746
Kreato3D

Kreato3D

3D printer file info

3D model description

Introducing the StreetBasher.

A high performance AWD 1/7 scale street drift car.
Engineered for enthusiasts who appreciate the thrill of DIY projects, the StreetBASHER is not just a RC car, it's an experience waiting to be crafted.

Dimensions:

Wheelbase: 404mm
Width: 310 mm
Length: 682 mm
Height: 136 mm roof / 152mm wing

3D View: link

BOM: link

Printed parts list: link

BUILD GUIDE: link

If you want to support me, you can always buy me a coffee
https://www.buymeacoffee.com/kreato3d

3D printing settings

Don't change orientation of the stls when printing

Min 250x250mm bed

Categories

All designs β€Ί Game β€Ί Auto & moto / RC vehicles / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.