Model
Astro-Planter - a planter in the shape of a half moon, with an astronaut on its edge.
Designed in Nomad Sculpt.
See making of:
Print Settings
Layer height: 0.28mm
Infill: 15%, gyroid
Supports on the Astronaut (Plate 1), no supports on the Moon and Plate (Plates 2-3)
Print time (Bambu P1S):
- Astronaut: 15h2m
- Moon: 3h53m
- Plate: 1h12m
Total print time: 20h8m
Filament
AMS: 4 colors for Astronaut, 1 color for Moon/Plate
Model:
- Astronaut: 111.36g
- Moon: 157.40g
- Plate: 59.62g
Flushed:
- Astronaut: 183.84g
- Moon: 0.01g
- Plate: 0.01g
Tower:
- Astronaut: 32.89g
- Moon: N/A
- Plate: N/A
Total: 545.12g
Filaments used in the pictures:
Assembly
Once the 3 plates are printed, attach the Astronaut to the half-moon holes with a bit of glue, hold in place, and then place the half moon on the plate.
Then add a plant or flower with some soil in the half moon, and you're done!
Note
The astronaut may be a bit heavy once it's attached to the moon, but don't worry, once you add some soil, the planter will become sturdy and balanced.
Upon request I can upload a new profile with less infill on the astronaut and more infill on the moon, or adjust the infill yourself in the slicer.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.