Torture Toaster with double Dovetail Test Remixed by Onkelsam

Remixed by

Onkelsam

3D Printer>Test Models

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill basic setting

Designer

6.2 h

1 plate

4.7(69)

only toaster

5.5 h

1 plate

Boost

185

574

462

Released

Description

the well-known torture taoster from clockspring with a double dovetail test.

The dovetail test has a tolerance of 0.1mm.
Dovetail should be able to be pressed into the desired position with firm pressure.

The 0.2mm height standard settings were used for slicing.

Cold plate with glue works perfect for me.

IMPORTANT: The print does not have to be perfect or beautiful. It is there to show what your printer can do and where improvements may need to be made (print adhesion / cooling / material ... etc.)

dovetail tolerance test

Comment & Rating (78)

@mymatekagome

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

Printed in Generic ABS. .01 tab was initially stuck, but with a little pressure from bottom came loose. Broke the tab at the top of it when I tried first. Still happy with the results and know what I'm needing to do or not do with it.

The designer has replied

@Onkelsam

Are you printing in your car ?🤣

(Edited)

@mymatekagome

Replying to @Onkelsam :

no I wasn't, printed over night and took pictures on the way to work.... though maybe I can heavy duty truck life

@stedechamp

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

Facile à imprimer avec la bambu Labs x1c

@A.A.batgull

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

printed perfectly

@Sunlight_Surge

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

the best of the tests. this thing printed near flawlessly on my x1c. amazing!

@owenramon77

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

It's just what I needed!

@aussie_morty

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

with P1S until 60 degrees it pretty good. 0,2 was hard to loosen up and to move, but possible. 0,1 was stuck forever. I was not able to get the toast all the way out. the pusher broke of before. not sure what was the problem here. cool design to test the printer!

@KoBuCRAFTS

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

Beautiful model, printed really nice, only the 0.1 and 0,2mm clearance parts are stuck, rest is moving very smooth! :) I like this print!

@luisillo

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

realy nice print. my P1S nailed it!

@ammy

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

@jolon14623

Print Profile

0.2mm layer, 2 walls, 15% infill basic setting

Strength Issue:printed fine. some of the parts broke maybe that’s a filament issue but the filament has been strong for other stuff. also top layer came out bad. I just printed blue spirit mask with same pla and it was fine.

This remix is based on

The Torture Toaster

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (78)

This remix is based on

License

Related Models

Double-sided cat coasters

Impossible "Dovetail style" square box V2.0

Modern Toaster SD card holder

Matco Tools-Inspired Double-Stacked Tool Chest