This is a digital 3D printable model of the Cat Pendant from The Witcher.

The download contains STL of the model ready to be 3D printed on a 200 mm print bed placed on the print bed as we would print it to save you time.

SIZE
At 100% scale the model’s dimensions are approximately:
Width 70 mm
Length 59 mm
Height 25 mm
You can scale the model as you wish. When scaling down, we recommend printing on an SLA printer.

3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don’t have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.