Here is a modular hair claw clip with 3 different claw. The system is very simply.
- You don't need support on the clamp, and you still need it on the clip.( you should set the overhang threshold to 35 degrees to use less material)
- The opening problem is solved thanks to the comment. Now the clip claws are smaller and the pliers open wider
- There are two forms of clamp and clip, a straight one (V3) and a slanted one (V3 slanted).
Print detail :
- Material : PLA
- Print layer : 0.16mm
- Support : Everywhere
- Infil : 15%
Dimension:
- Clamp V3 : 40mm/35mm/20mm
- Clamp V3 droit : 40mm/35mm/27mm
- Clip 1 : 70mm/40mm/22mm
- Clip 2 : 60mm/33m/22mm
- Clip 3 : 60mm/25mm/22mm
Please give me return to improve it and ad new claw. Thank you.