There are 2 print profile: one with AMS and one without AMS. If you don't have AMS you need to manually change the filament at the proper layer (see below). Be careful to properly flush the filament during the loading of the new filament to avoid color mixtures.

Feel free to scale at your needs, but remember to lock the z-axis to 100%.

If you like it, look at my other HueForge Artworks here.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA+ Sunlu White Transmission Distance: 7.2
• PLA+ ELEGOO Black Transmission Distance: 1.7
• PLA+ ELEGOO Red Transmission Distance: 8

Swap Instructions:

1. Start with White
2. At layer #6 (0.56mm) swap to Black
3. At layer #17 (1.44mm) swap to Red
4. At layer #25 (2.08mm) swap to White for the rest.