Glock AAP01 to MP5 HPA Adapter Airsoft by Itachi

Itachi

Hobby & DIY>Sport & Outdoors

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

it is for Airsoft! NOT a real firearm !!!

Adapter works with all three types of CYMA magazines.

When you have Questions let me know and i will help you.

It has a working BB stop.

Only a small spring is required between the top and middle inserts. And you need a spring for the mag releases.
For the mag Releas you need a lil Screw and a lil nail.

Screw you need, the lil M3 Screw : https://de.aliexpress.com/item/1005003070074913.html?spm=a2g0o.productlist.seoads.3.2697445b6PhWl2&p4p_pvid=202309240515591408809529958190006507737_2&s=p

HPA Connektor, you will need the KJW WE one: https://de.aliexpress.com/item/1005004283893930.html?spm=a2g0o.productlist.main.43.5ca2QmntQmntHU&algo_pvid=1c3b4580-2e71-4979-9f30-17bf6550f996&algo_exp_id=1c3b4580-2e71-4979-9f30-17bf6550f996-21&pdp_npi=4%40dis%21EUR%213.23%212.26%21%21%213.36%21%21%4021038edf16955576063107654ec621%2112000028624697895%21sea%21DE%210%21AB&curPageLogUid=RsPfgoCVbp8n

Print 100% invill!! and do some Suportblockers inside the Air pipe.
When u Print, Print it Upsite Down.

I Print it with ABS and ASA CF and it Work Great. When u Print it with PLA attention to the Sun in Summer. (melts away)

Comment & Rating (4)

@user_938391840

Hi, i need help, i made it, it's look great but i've a holes between the gas tank and the mag insert, should i block it ?

The designer has replied

@Itachi

what do you mean with a hole ? where is it ? u have to put on a O ring on the point that goes in to the gas Tank. Normaly you can use that one that is allready istalled when you unscrew it

@user_938391840

Replying to @Itachi :

Hi, i figure it out while dissasembling, but i have so mutch leak atm , from the screw that hold everything i got leak even with a greasy o ring, and i got leak around the base too. I was thinking to isolate everything with silicon ( on the bottom screw and around the base). And i got really hard time sanding the bb's guide rods, my bb's would every time stuck at the middle. Beside this, every fit, the cyma mag hold but weggle a little but some taps and all good.

@Itachi

Replying to @user_938391840 :

oh sry to hear that. do you print it all as my picture showed you? and did you print with 100% infill? when i print it it all fit realy good max 5min of sanding som times.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.