⬡ Hex Lamp for LED Strip Lights
⬡ Hex Lamp for LED Strip Lights
Boost
434
652
53
GIF
GIF
GIF
GIF
Print Profile(2)
Designers Suggested 0.2mm layer, 2 walls, 15% infill
Designer
8.6 h
1 plate
0.2mm layer, 2 walls inside, 1 wall outside, 15% infill
7.5 h
1 plate
Boost
434
652
53
52
475
194
Released
Description
I developed this to hold most of a 5m strip of LEDs, cut off or tuck in the remainder.
LEDs HERE https://us.store.bambulab.com/collections/led-strip-light?skr=yes
Super easy instructions:
Poke the wire through the bottom hole.
Remove backer and tightly stick the LED strip up the inner tube.
Put the parts together and plug in, so simple!
The remote receiver is outside the lamp and works perfectly!
Comment & Rating (53)
All
Boosted
Printed cover in white, transparent, and frosted transparent to see which I liked better. I still can't decide. Great model!
The designer has replied
4
Reply
wow!
1
Reply
Printed using translucent PETG with supports. Highly recommend using PETG for the higher glass transition temperature and natural transparency of PETG.
White works well, but the clear one with the slow “clear” BL profile works best with this model. Total print time was almost 3 days
(Edited)
The designer has replied
0
Reply
wow!
0
Reply
Replying to @TripleGWorkshop
I recommend using BTFlighting off Aliexpress "WS2812BEco white 60 led/m" strips as that one is low power and one injection point provides enough power without any major voltage drop on that strip. They are half the price of Bambu Labs version.
I also recommend this controller "GLEDOPTO ESP32 WLED" off Aliexpress that uses WLED and has more features than the BL one.
Power brick I recommend a 5V 6A with a DC barrel that plugs into the WLED ESP32 box. Here is the final build with transparent PETG, which I highly recommend for this project for maximum clarity.
1
Reply
Replying to @user_4134630153
Did you cut each revolution of LED strip or is it "diagonally" winded around the cylinder? Thought it could be interesting to create segments in WLED for each row of LED rings? Or maybe light diffusion is good enough and no need?
0
Reply
Boosted
Printed it in Tiffany Blue and it’s stunning
The designer has replied
0
Reply
<3
0
Reply
Boosted
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
straightforward print with nice results, thank you
The designer has replied
0
Reply
That's fire :)
0
Reply
Great Design and Perfect for WLED :-)
1
Reply
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
Printed great, and looks even better.
Used almost a full 5m roll of 60led/m IP30 WS2812B 5V paired with a DigUno running wled and works great!!
0
Reply
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
Turned out great. Looks fantastic when lit up
0
Reply
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
great Lamp, but i have to spend some time in optimizing my Filament and printer.
0
Reply
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
Great lamp design, came.out really good!
0
Reply
Print Profile
Designers Suggested 0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld