Here is the semi-automatic cotton swab dispenser!

Easy to print and use, it's just what you need to add some style to your bathroom.

For this, you only need :

• cotton swabs
• The three printing files.

Nothing simpler, and if you want, some pebbles and sand to weigh down the base with a little glue.

You will only need supports for the box; the rest can be done without them. As for assembly, it's quite simple. You place the mechanism inside the box with the notches; you might need to apply a bit of force. Then, you fill it with sand and close it with the lid, adding a bit of glue. Next, you place the cotton swabs on the top (make sure to place them properly for smooth operation). Finally, you close it up, and there you go!

Then, to retrieve them, simply lift the box and place it back, and voila, you're all set!

V2 25/03/2024 

I have reworked the lid so that the cotton swabs fit better. Additionally, I realized that the box had not been modeled correctly, so it is now easier to put the lid on, and the mechanism is higher to retrieve the cotton swabs. Let me know if this is good now