This is a Remix of Filboyt's "2020 / Ender 3 Filament Guide." The original design snaps in to the end of the aluminum extrusion top rail, replacing the OEM end caps. My remix attaches to the side of the rail with a M4x20mm socket head cap screw and an M4 T-nut. In my case, I need these parts to be nylon to survive in a heated enclosure. I found that snaps in the orignal design broke off, so I made this bolt-on remix. Hope it's useful, and thanks to the original designer(s)
Original Filament Guide:
Filboyt's "2020 / Ender 3 Filament Guide"
https://www.thingiverse.com/thing:2917932
Other items in my set-up:
DiJo's "Sunlu Dryer Box filament guide"
https://www.thingiverse.com/thing:4717031
youngjc's "Sunlu Fila Dryer Top Mount"
https://www.thingiverse.com/thing:4633179
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Black
Notes:
I printed in Nylon because this needs to survive in a heated enclosure. PLA should be fine if operating at room temp.