Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Bambu Black Transmission Distance: 0.3
PLA Prusa Galaxy Green Transmission Distance: 1
PLA Prusament Opal Green Transmission Distance: 2
PLA Bambu Green Transmission Distance: 3

Swap Instructions:
Black until layer #5 at 0.48mm
Galaxy Green until layer #7 at 0.64mm
Prusament Opal Green until layer #12 at 1.04mm
Green for the rest.

Colors are also split on .3mf

Image downloaded from https://www.seekpng.com/ipng/u2a9o0i1u2q8e6i1_heath-ledger-joker-png-dark-knight-joker-png/