Telescope holder, protects the collimation and locking knobs of the primary mirror when leaving it in storage. The telescope model is TS Photon 800x203, other Ø 8” Newton telescopes (GSO, SkyWatcher, Bresser) may be compatible, but I don't know.

I considered assembling a single piece with print supports, but I found this solution more fun to carry out. I intend to divide the main pieces so that the set can be printed on small printers, for now it requires at least a printer with size (xy) 25x25 cm.

I printed the main parts at 0.20 mm layer height and the screws at 0.16 mm.

The screws that press the tube have holes to finish the tips with hot melt silicone