Planter with legs
Planter with legs
Boost
915
1547
151
Print Profile(4)
Large, 0.24mm layer, 2 walls, 15% infill
Designer
9.2 h
1 plate
Small, 0.24mm layer, 2 walls, 15% infill
Designer
3.1 h
1 plate
adjusted legs sizes, 0.24mm,3 walls,10% infill - A1 mini
3.7 h
2 plates
![[Large+Small] 0.28mm layer, 2 walls, 15% gyroid infill](https://makerworld.bblmw.com/makerworld/model/US73c94a0ca22b7c/72942328/instance/2024-04-20_447387da9fc19.png?image_process=resize,w_100/format,webp)
[Large+Small] 0.28mm layer, 2 walls, 15% gyroid infill
12.4 h
2 plates
Boost
915
1547
151
55
1.9 k
950
Released
Description
Modern planter with legs, available in two sizes with opening of 115 mm and 72 mm for a smaller pot.
Legs need to be superglued onder the pot into their dedicated slots.
If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign
Check out more of my designs below and on my profile:
Comment & Rating (151)
All
my wife love it, thank you for your designs, especially for the easter designs :-)
The designer has replied
1
Reply
wow great pictures, love it!
2
Reply
Print Profile
Large, 0.24mm layer, 2 walls, 15% infill
Love it! Easy print scaled to 120% on my A1 mini using .6 nozzle. Took over 11 hours and worth every minute
1
Reply
Printed on A1 mini. I downloaded the Large version…
NOTE to Designer : Thanks ! Scales great. I scaled (each part) 118% with the pot having an opening of about 136mm on the A1 mini.
(Arrage> auto rotate for the legs to fit on plate).
No modifications to the Designer file other than scaled to 118% (each part separately). Legs fit snug and didn't need any glue after upscale, but I might glue them anyway. Printed perfect ! PolyTerra PLA Army Green.
1
Reply
Boosted
Print Profile
Large, 0.24mm layer, 2 walls, 15% infill
fabulous print!
1
Reply
Print Profile
Small, 0.24mm layer, 2 walls, 15% infill
amazing!
1
Reply
Print Profile
Large, 0.24mm layer, 2 walls, 15% infill
Excellent print, printed in just under 10 hours. I did the large profile from the designer. Will add a photo when the plant is transplanted.
(Edited)
1
Reply
Print Profile
adjusted legs sizes, 0.24mm,3 walls,10% infill - A1 mini
Perfect output at first attempt. The only issue I see is the loose fit of all four legs. Holes are too big - a strong glue is needed to finish the product to be durable & safe to use.
(Edited)
1
Reply
Boosted
Print Profile
Small, 0.24mm layer, 2 walls, 15% infill
very nice
1
Reply
Print Profile
Small, 0.24mm layer, 2 walls, 15% infill
Really nice design. The feet fit perfectly, just used a tiny drop of super glue for security.
Printed in Bambulab PLA Matte Latte Brown.
0
Reply
Boosted
Print Profile
Large, 0.24mm layer, 2 walls, 15% infill
beautiful design! infill was a bit high for my liking on the profile but great print :)
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld