ATTENTION read all the information in detail before starting the project!!!!
Corner lamp to create ambient light. This lamp is inspired by the model (Phipils Gradient Signe floor lamp), but at a price about 10 times lower, these lamps do not have dynamic effects as the Philips (each LED has a different color) but allow you to create a very Ambient different atmosphere in a room at a very affordable price.
They are perfect for putting on the ends of a sofa to create ambiance along with the LEDs on the TV.
The total cost of 2 lamps is approximately 50€ (20€ 5 meter led strips + 20€ 2x led strip mounting profiles + 6€ 3dparts) The approximate price depends on the chosen LEDs and filament.
¡¡¡¡IMPORTANT!!!! Before printing the base, check with the fitting part that the profile fits without problem in case it is necessary to scale the part a little in the x and y axes.
The total height of the fixture once assembled is 1.15 m.
Material required:
Profile for mounting led strips. I used 1m long profiles to mount led strips up to 20mm wide. This is the model I have:
https://amzn.eu/d/ghnaZGa
LED strips. Here you can choose any but it is best to choose alexa and smartflife compatible models. This way, you will be able to create different ambiances and activate them by voice commands. It is also interesting to choose LEDs that have the cool and warm white chip independent of the RGB, this way they are used to illuminate the room like a traditional lamp.
This is the model I have:
https://amzn.eu/d/bxkuj3T
10x M3x8mm screws for anchoring the profile and bottom cover https://amzn.eu/d/2gpXgOv https://es.aliexpress.com/item/32851160485.html?spm
If you do, let me know in the comments and in the markup section! ;)
///////////////////////////////////////////////////////////////////
ATTENTION read all the information in detail before starting the project !!!
Corner lamp to create ambient light. This lamp is inspired by the model (Phipils Gradient Signe floor lamp), but at a price approximately 10 times lower, these lamps do not have dynamic effects like the Philips ones (each LED has a different color) but allow you to create a very different environment in a stay at a very affordable price.
They are perfect to put at the ends of a couch to create an atmosphere together with the LEDs on the television.
The total cost for 2 lamps is approximately 50€ (20€ 5meters led strips + 20€ 2xled strip mounting profiles + 6€ 3dparts) Approximate price depends on the leds and filament chosen
IMPORTANT!!!! Before printing the base, check with the adjustment piece that the profile fits without problem in case it is necessary to scale the piece a little in x and y axis
The total height of the lamp once assembled is 1.15 m
Necessary material:
Profile to mount led strips. I have used 1m long profiles to mount leds up to 20mm wide. This is the model I have:
https://amzn.eu/d/ghnaZGa
LED strips. Here you can choose any but it is best to choose models compatible with alexa and smartflife. In this way, you can create different environments and activate them through voice commands. It is also interesting to choose LEDs that have the cold and warm white chip independent from the RGB, in this way they are used to illuminate the room like a traditional lamp.
This is the model I have:
https://amzn.eu/d/bxkuj3T
10x M3x8mm screws to anchor the profile and the bottom cover https://amzn.eu/d/2gpXgOv https://es.aliexpress.com/item/32851160485.html?spm
If you make it, let me know in the comments and in the makes section! ;)