Plant Swing!

A funny cute plant pot sitting on a swing. Give your pot different hair styles by choosing your plant. I’ve included a attachment so the swing can be attached under a shelf, window frame or on the ceiling. If there is interest for a attachment the can be hung from the wall I will make one!

Please leave a like, feedback and don’t forget to upload your makes! If you’ve got any trouble don’t hesitate to contact me.

Materials needed

• 1 piece of rope. ~3mm diameter.
• PLA
• Plant
• Glue
• (2 screws) if you want to hang it up underneath a shelf or window frame.

Assembly:

• Glue the arms and legs in place. (arms should be vertical up, for the rope.)
• Glue the shoes on the legs.
• Cut 1 piece of rope at the desired length. (2x the length between the attachment and actual height you want the swing to be hanging.
• Insert the rope through the holes in the swing from the top side down.
• Tie a knot on both ends of the rope to keep the seat in place.
• Press the rope in the hands of the pot.
• Attach the attachment to the desired place and screw it down.