Please enjoy this Art Deco utilizing Hueforge, showcasing everyone's fan fave, Baby Yoda.
Need a way to display your prints? Use the link below for a wall frame for my files!
https://makerworld.com/en/models/433580#profileId-338327
Measurements are 180x180mm. This is a fairly thin print so please be careful removing it from the build plate.
Print instructions are as follows:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA Sunlu Grey Transmission Distance: 1.3
PLA Sunlu White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #12 (1.04mm) swap to White for the rest.