*** So it was brought to my attention that I have the blue and red colors of the flag reversed…. I apologize for that. I went ahead and updated the files and the sliced plate to correct this mistake!

Hi there! I have designed this light box for a friend of mine, and I thought I would share it with anybody who might want it. I have made the opening as small as possible to accommodate these lights from amazon; https://www.amazon.com/dp/B0B7P65KWM?ref=nb_sb_ss_w_as-reorder_k0_1_8&=&crid=196FMIIPPSVUK&sprefix=cob%2Bled%2B&th=1

The settings included in the files are what works for me. I usually pause the print after a color swap to give me time to clean the stringing from the previous color, resulting in a cleaner print.

*** Since I only have one AMS unit I was limited to only 4 colors. The yellow box will show infill when lit up, that's why I reccomend changing the infill to 100%. If there is interest, I can upload a version with the black box.

If you print this I would love to see it! Please leave feedback as I am new to creating profiles, I would like to know what I'm doing wrong!