The AMS Feeder Button is always very difficult to press. My hands are not big, but the small range is not very comfortable.

I continued the original style of Bambu lab and created this model with a large area.

I also found that other existing models were very difficult to install, so I designed this more convenient model from scratch.
I hope this can help everyone. please give me a 👍🏻 if you like this, it’ll help more people discover this. thanks so much!

I created several versions.
1.Normal version without any pattern
2. Supports up to 4 AMS numbered versions
3. Simple and easy to understand arrow version

4.L&R First commenter thanks version( 3 colors)

In addition, I uploaded 3 colors/2 colors/single color (normal)
Please choose your favorite model according to your needs.

I printed a simple cutaway model that gives a good idea of how this model works and how to protect your feeder from wear and tear.

4mm PTFE tube can be installed at the entrance (it is recommended to use a PTFE tube with a wider inner diameter)

The installation method is very simple, you only need to put the model on from above.

It will be automatically positioned and locked during normal use or printing.
The model can be removed in the opposite direction (it may be a little tight during initial installation)

I noticed that there are many corrected versions from other creators because AMS has multiple versions.
The AMS I own is an old version, and I collected the modifications made to the model by other creators, as well as photos and descriptions.
Therefore, this model is theoretically compatible with both old and new versions of AMS.

In addition, I reconstructed the original AMS button model based on clear photos. I uploaded the STEP file to Raw Model Files, hoping to help the community grow.

----------中文解說----------

AMS的送料口按鈕總是非常的難按,我的手不算大,但那小巧的範圍實在不是非常舒適.
我延續拓竹的原始風格,創建了這個具有大面積的按鈕模型.

我創建了數個版本.
1.沒有任何圖案的normal版本
2.最大支援4個AMS的編號本版
3.簡單易懂的箭頭版本

4.L&R首位評論者感謝版(3色)

另外我上傳了3色/2色/單色(normal)
請根據需求選擇你喜歡的模型.

我印了一個簡單的剖面模型,它可以很好的說明這個模型如何運作以及如何保護您的餵食器免於被磨損.

入口處可以安裝4mm的PTFE tube.(建議使用內徑較寬的PTFE tube)

安裝方法非常簡單,你只需要從上方將模型套上.

它會在你正常使用或是打印過程中自動定位並鎖住.
反方向即可拆卸模型（初次安裝時可能會有點緊）

我注意到其他創作者有許多修正版本,因為AMS有多個版本.
我擁有的AMS是舊版本的,我蒐集了其他創作者對模型的修改內容,還有照片與描述.
因此這個模型理論上兼容新舊版本的AMS.

另外我根據清晰的照片重建了原始AMS的按鈕模型,我將STEP檔案上傳至Raw Model Files之中,希望可以幫助社區成長.