Wavy car trash can - Vase mode by Every Day Counts

Every Day Counts

Hobby & DIY>Vehicles

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 1 walls, 0% infill

Designer

1.5 h

1 plate

5.0(2)

Lid: 0.2mm layer, 2 walls, 15% infill

Designer

33 min

1 plate

4.5(2)

Boost

Released

Description

Trash can designed to fit into the centre or door cup holders for trash, receipts or other items.

Fitted with a flip lid (that can be removed) to allow maximum access to put items in.

I recommend printing this in a material that can withstand high temperatures in cars during summer - ie. ASA or ABS is recommended.

Height is 155mm (just over 6 inches)

Base diameter is 72mm (just under 3 inches).

IMPORTANT NOTE: When assembling the lid, it is best to join the parts together when the lid is open (straight upwards), as the axle has a flat section to allow the connection. Do not press the lid onto the axle when the lid is closed.

Comment & Rating (6)

@ProfessorBennu

Print Profile

Lid: 0.2mm layer, 2 walls, 15% infill

The hindge on the lid broke the first time it was put on but the support ring for the can itself is solid

The designer has replied

@EveryDayCounts

Thanks for the feedback. I will have a look at the model to see if adjustments can be made.

@EveryDayCounts

Hi @ProfessorBennu. I have just modified the lid design to strengthen it and uploaded the files. If you want a new lid, print just the upper part of the lid (not the ring), as it is the only part that has changed. Thanks for bringing this to my attention.

@ProfessorBennu

Print Profile

0.2mm layer, 1 walls, 0% infill

Printed without issue