This came out so cool! Absolutely love it! PLA+ Matte Rainbow

sarah.hemingway80

0.2mm layer, 2 walls, 11% infill

Fredwood6000

Prints beautiful, solid and perfect action on the handles. 

Ontheriver

richard.niederleitner

sieht richtig gut 💪

Beste Grüße,
Fredwood6000✌️

Der3De

😍
I must say, what you've printed looks really good. May I use that picture as a cover for this print profile?

it’s an awesome basket!. Even with a brim the handles were still a bit iffy - likely because my aux fan was going for the first 10-12 layers before I realized it. The handle on that side of the machine did crack (split at a layer) when I took the basket off of the plate. No fault of the model though. I went back and cut the model to parts and made the handles solid and made sure my aux fan was off this time! The handles are even stronger now. I uploaded my print profile with solid handles. 


ashley.florack

filament is insanmate rainbow on amazon. 

yi.zhu24

stevecary

Infinity 3D Prints

Fatarius

920FLXERS

50% Scale, 0.2mm layer, 2 walls, 5% infill

TripleGWorkshop

cover

2023-10-26_vvzus2lwk1lj.jpg

2023-10-26_3qvmy1qynxg9.jpg

2023-10-26_70hpwpw1atpa.jpg

2023-10-26_p48cd5834po8.jpg

2023-10-26_cdhkrdzmirb7.jpg

2023-10-26_s6zv4ol4sfag.jpg

plate_1.png

plate_1.webp

IMG_9008.webp

92% scale, 0.2mm layer, 2 walls, 5% infill

Unbenannt.webp

oSee3D

<ul><li>Print without AUX-Fan</li><li>Use Glue Stick</li><li>Avoid drafts when printing, close your printer</li><li>Make sure your print bed is level and adjusted correctly</li><li>Heat the print chamber to approximately 32°C to 35°C (90°F) and maintain this print chamber temperature during printing</li></ul>&nbsp;Large prints, here in their original size, can detach from the print bed if the environmental conditions during printing are unfavorable.Especially in the cold season there are changed conditions, such as different, lower humidity and a lower level of ambient temperature. Therefore, please be sure to follow the instructions for printing!&nbsp;Have fun printing!

Full Size (100%) 0.4mm nozzle, 0.2mm layer, 2 walls

20231123_133214.webp

20231123_133551.webp

20231123_132935.webp

SavageLau

3 walls, 15% infill, added brim to prevent handle fail

75% Scale, L130mm * W146mm * H100mm

IMG_7425_8dccdb9c-5263-4bdb-8516-0c863f136894.webp

The handles have been split into objects and will print solid - basket was increased to 120% - max size that fit well on my P1S.&nbsp;No supports&nbsp;.20 mm layer height but also applied adaptive layers. 8mm outer brim to prevent handle failure.&nbsp;2 walls 11% Gyroid infill on basket portion.&nbsp;Solid handles.&nbsp;&nbsp;

Solid Handles 0.2mm layer, 2 walls, 11% infill 8mm brim

No supports - Scale down to desired size or print huge.<figure class="image image_resized" style="width:86.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120231/2023-10-26_ssvdww5lm2bp.jpg"></figure><figure class="image image_resized" style="width:86.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120231/2023-10-26_zqjkoxmikb6r.jpg"></figure>

Print Profile(5)

Description

Comment & Rating (88)

License

Related Models

Slim Wallet (V4) - print in place

Fidget Knob {PRINT IN PLACE}

Lumi cute ghost / Print in Place

Flexi Articulated Snake 114 cm long

Print in Place Basket w/Handles