F1 logo light box - Formula 1 theme
Boost
42
51
6
Print Profile(9)
185 mm Left hole 0.2mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
A1 mini 185 mm left hole
Designer
1 h
1 plate
280 mm no hole
Designer
2.1 h
2 plates
0.2mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Click to see more
Boost
42
51
6
1
75
29
Released
Description
An easy print of F1 logo light box. There are three versions of the file, without hole, with hole on left or right side for led cable. If you need a different hole, you can make it on Bambu Studio.
There are also two different versions of every file, one a little bigger of the other one, as you can see in the following picture. The bigger one is 280 mm long, and the other one 185 mm.
Comment & Rating (6)
All
Print Profile
185 mm Left hole 0.2mm layer, 2 walls, 15% infill
the lid comes off to easily but a great print over all
The designer has replied
1
Reply
It is probably linked to the fact that I deliberately added 0.2 mm of tolerance to be ensure that it was also suitable for those who have printers that are not perfectly calibrated. I printed it myself with an Ender 3S1 pro, I will try to do it again with the P1S and if necessary I will add another stl. Thanks for your feedback
0
Reply
Boosted
Print Profile
A1 mini 185 mm left hole
bello ma il coperchio non chiude bene,sarebbe da allargare leggermente per fargli fare più presa
0
Reply
Print Profile
185 mm Left hole 0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
A1 mini 185 mm left hole
0
Reply
Print Profile
280 mm no hole
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld