Ratcheting Wheel Fidget
Copyright Claim
Ratcheting Wheel Fidget
Boost
128
250
45
GIF
Print Profile(2)
(Official) 0.16mm layer, 3 walls, 30% infill
Designer
2.7 h
2 plates
A1 Mini, 0.16mm layer, 3 walls, 30% infill
2.7 h
2 plates
Boost
128
250
45
1
520
308
Released
Description
Description
A fidget toy that combines two ratcheting wheels, allowing rotation in both directions with a satisfying clicking sound.
During assembly, align the faces of the two wheels in the same direction, using the arrows as a reference since each wheel has distinct front and back sides. Otherwise, it will rotate in only one direction.
Doubles as a Bit Tool
Furthermore, this model can be used as a ratchet handle tool for 6.35mm screwdriver bits. By flipping it over, it can be used for both tightening and loosening.
The ratchet mechanism has 30 teeth, with a 12-degree ratcheting angle.
Comment & Rating (45)
All
Print Profile
A1 Mini, 0.16mm layer, 3 walls, 30% infill
turned out great
(Edited)
0
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
Printed pretty well, Works very nicely. Just had to sand down the hexagon part, due to me being lazy and not calibrating my filament...
0
Reply
Printed well. Not recommended as toy for children, it's way too strong.
0
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
easy print
0
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
I like that it's useful for more than just keeping myself occupied. My wife and my dog HATE it. it's VERY loud. The one thing is that the bottom of one model goes against the top of the other so one has the texture of the baseplate and one has the top layer texture from the print head. If this is the sort of thing that bothers you, make sure you flip one of them over before printing so that the textures match.
0
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
Belle impression, le clic est un peu dur mais il faut ce qu'il faut :) ... en tout cas très satisfaisant comme dit mon fils ^^
1
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
Printed nicely, the ratcheting works flawlessly. also very nice for super tight spaces there a normal ratcheting driver would not fit.
1
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
clicky
1
Reply
Print Profile
(Official) 0.16mm layer, 3 walls, 30% infill
Little bit strong for ratcheting. Otherwise printed nicely.
0
Reply
Print Profile
A1 Mini, 0.16mm layer, 3 walls, 30% infill
Printed perfectly
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld