Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers
Copyright Claim
Tool head / Hot end Direct Drive BMG+ e3d V6 for Ernder 3 and similar printers
Boost
9
14
2
Print Profile(0)
Add the first print profile to earn points
Boost
9
14
2
0
24
0
Released
Description
Parts required :
Slim 23/20 mm thick stepper motor
BMG extruder /clone
E3D V6 hotend/clone
30x10 mm blower fan 24v recommend
M3x8mm bolts x 5
M3x16mm blots x2
M3x20mm bolts+nuts x2
M3 brass inserts x6
5x3 mm neodymium magnets
Modifications required:
Vent holes drilled in the aluminum carriage
One extra 3.5 mm hole drilled for fitting Body P1 to the carriage and Bracket P1 assembly
Offsets needed to be adjusted in firmware due to the nozzle changing position
Comment & Rating (2)
All
Also, can you give any advice in how to mount the BMG extruder into this? There seems to only be one hole that lines up with it, and I feel like that isn't enough to hold both it, and the stepper mounted onto it securely.
0
Reply
This thing looks amazing! I'm just about to start printing it, but I'm concerned about the size of the part cooling fan. The stock Ender 3 uses a 4010 blower, but this calls for a 3010. Is there going to be enough part cooling? I'd greatly prefer it be like the K1 and have a 5015 blower fan for part cooling. Could this be an optional extra? Cheers!
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld