AMS Lite Versatile Mounting System w/Ikea Lack Stand option by altair3d

altair3d

3D Printer>3D Printer Accessories

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

17 h

5 plates

5.0(13)

5mm holes (for 3/16" SNAPTOGGLE bolts), 0.16mm layer, 10 walls, 25% infill

4 h

1 plate

Boost

128

140

Released

Description

I have been using 3 Ikea Lack side tables for my Prusa Minis and have enjoyed the size. When I got the A1 Mini, I was barely able to fit everything on the Lack side table, but not very well. This stand aimed to fix that, and hopefully other difficult spaces. It allows you to mount it to the side of the table, pushing it to the right as far as possible while still being stable. You will need to 2-4 screws depending on the mount you choose. The AMS mount is dovetailed to allow you to remove it with out needing to unscrew the stand from the table or wall.

I've also included three mounts. One for any standard desktop that bolts with two screws from the side and a single screw on top. Another one That will allow you to bold it to the wall. And one for the Ikea Lack Side Table.

If you have any suggestions, or would like any modifications made, please let me know. I'd love any feedback you can give.

Comment & Rating (24)

@rhines44

just what I needed. I modified one file to wrap around a 1” desk and all came out great. thanks for putting the time into this.

The designer has replied

@altair3d

Awesome, glad you made good use of it.

@Badio

can you please modify the license settings to allow remixes? or contact me and add the skadis version i made, or just make it , i don't care for the credits :) i just want to share

(Edited)

The designer has replied

@altair3d

I've modified the license. Thanks for reaching out!

@tekaeins

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed in PETG and works fine! Did a little customizing at the fastening to fit at my Ikea Platsa

The designer has replied

@altair3d

Awesome, glad you like it.

@micheal.c.snide

Print Profile

0.2mm layer, 3 walls, 15% infill

feels well designed and goes together smooth!

@ken.oh

Print Profile

0.2mm layer, 3 walls, 15% infill

Top ! Imprimé en PETG.

@adamgda

Print Profile

0.2mm layer, 3 walls, 15% infill

@bionicpredator

Love the design. Couple of questions, on the wall mount is the dovetail the full length of part that attaches to the AMS lite? Also does the wall mount allow the spools to clear? Lastly would it be possible to add more mounting holes to the base of the wall mount? I want to hang the AMS lite upside down and was looking for something like this that I could use to mount upside down and still slide the AMS lite off when needed.

The designer has replied

@altair3d

Thanks a ton. I have designed it to clear with the spools installed. I've attached an image to show the two pieces together. They are both the same same length, so the fit together nicely. It would be fairly simple to add holes to the supports. You could even add them in the slicer fairly easily with a negative cylinder. Let me know if you need any help with that.

@BartmanEH

I've modded the wall mount to accommodate 3/16" bolts (5mm instead of 4mm) so I can use Togglers. Does the wall mount provide enough offset clearance to allow all four spools to be mounted on the AMS Lite and not hit the wall?

The designer has replied

@altair3d

I haven't printed it yet, but according to my measurements, it should clear with all 4 spools on.

@Tabculix

Boosted

thank you very much it helps me alot but i have 1 thing can you please add 1 or 2 additional screw holes on the top side for the Lack Holder it wobbles Quite alot i think 1 or 2 screws would fix it Like you have Done on the universal holder :) i have used Double Sided tape right now but screws would be way better :)