This dry box stand is tailored to exactly the right height for the Bambu Lab X1C P1P P1S.This makes it easier for the extruder motor to pull in the filement via the external access!

Problems can arise, especially with TPU and rolls that are still full.

And the design is somewhat Star Wars-like!

The model is only held together with the plastic bolts and is very stable.

If necessary, sand the bolts lightly with sandpaper, as they fit exactly with a tolerance of 0.05mm.

It is best to cover the bolts with a piece of wood and carefully hammer them in with a hammer.

It lasts and is super stable!

The design is free and the filament box holder can be adapted to other sizes or objects.

Printing parameters:

3 Perimeter 3 Top/Bottom 10% infill Straight line is enough!

Print the bolts with 5 perimeters!

Update September 24, 2023 Stability of the base platform improved!

Have fun with it!