Here you have a cute Santa Sign, hope you like.
As usual it will fit almost any midsize printer and don't need any support. You just need a little glue to bring it all together and it will look beautiful anywhere
all files are separated by color, so you can even print it with a single nozzle or no MMU system.
Print Settings
Material: PLA / PETG
Layer height: 0,20 mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10-12%
Perimeters: 2
Supports: no
You can see my other models here:
MEAF designs | Published - MakerWorld
________________________
If you like my designs and want to sell physical prints or support me , you can check out my patreon for commercial license and exclusive models
https://www.patreon.com/meafdesigns
________________________