Bambu Boeing 737 by HG_Design

HG_Design

Miniatures>Other Miniatures

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

8.9 h

3 plates

4.0(7)

Boost

322

547

1.2 k

177

Released

Description

Bambu Boeing 737

Prepared to be able to print on a single table, preferably with ams.

This was designed to be assembled and glued.

I made the STL of the fully assembled model available if you want to make a support stand.
If you have any problems or suggestions for improvements to this project, please leave them in the comments.

In the photos you can find the corresponding mounting location for each specific STL.

Thanks

Comment & Rating (52)

@bramirez4432

Pretty good print file! I modified it to be a P8 Poseidon which is a modified 737. Thanks for uploading this!

@tylerlleslie

I am looking to make a P8 as well... Do you have any of your modified files to share?

@shar3d

i love it

@shar3d

the white stuff is glue

@KyleWong

it looks so messed up cuz the gluing isn't even neat 💀

@shar3d

Replying to @KyleWong :

i dont glue the best but the design is nice

(Edited)

@Keiton_dad_1234

The print profile is no longer public

I was a little disappointed when I didn't get all the parts. Then I realized I clicked on you thing that only printed those parts. so I'm giving you a four since the parts that did print are pretty good

The designer has replied

@shar3d

the other parts cant lie flat

@shar3d

fixed

@jippeenator

excellent design for the aviation enthusiast in your life!

@YOR999

Turned out good. To save material change time, painted the windows.

@8p4mcnymh9

Trying to print the two fuselage sections and getting spaghetti every time. Upon close inspection in Bambu Studio, these parts in are not vertical, and only touch the bed on one corner. If you add support (which should not be necessary for these objects), you'll see it adds support under each (flat!) section of fuselage. Looks like a great model, looking forward to finishing the print.

@gtamdu

To correct it on the piece AF, slice 0.2mm from the bottom of the file, it then sits flat on the plate. For the AT piece, use the "Lay of Face" icon and click under the piece, it will again sit perfectly.

@plymouthvan

Boosted

Great model, but poorly optimized for the AMS. The all in one build plate takes an insane amount of time and wastes almost twice as much filament as it uses for the model. Reorienting the fuselage and printing it separately brings the total to less than two hours and a negligible waste. Great model though and the results came out fantastic without any post processing.

@becksprinter

The print profile is no longer public

very nuce

The designer has replied

@angel4964

Have u some pictures?

@becksprinter

Replying to @angel4964 :

sadly I do not have any ohotos

@user_1188408452

where is the rest of the plane??????

@plymouthvan

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Support Issue:I really like this model, but there were some serious problems that required considerable tinkering to resolve. The most serious issue was that the fuselage bottom surface on the front half was not truly flat, so no matter what it required supports at the bottom. I resolved this by splitting off the uneven section.

@user_4245354925

The print profile is no longer public

was soll bewertet werden? mehrere Teile fehlen

(Edited)

The designer has replied

@angel4964

English please

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (52)

License

Related Models

Bambu Beach Tennis

Boeing-737

Boeing 737-300

Boeing Models Keychains