Mini VLC Traffic Cone with Magnet for magnet boards by Wing-Art

Wing-Art

Tools>Gadgets

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 30% infill

Designer

49 min

1 plate

3.0(1)

0.2mm layer, 2 walls, 30% infill

Designer

33 min

1 plate

0.16mm layer, 2 walls, 15% infill

43 min

1 plate

5.0(1)

Boost

Released

Description

These eye-catching traffic cones are a playful addition to model train sets, model building projects, and workspaces. Whether used as props for photoshoots, decorative elements on desks, or mounted on magnet boards, they add a touch of magic to any project.

Traffic Cone with thin wall: v1

Traffic Cone with thicker wall: v2

For the following two sizes for magnets:

12mm x 2.5mm

10mm x 2mm

For best fit glue the magnets in or heat them with a soldering iron.

Comment & Rating (6)

@edu.ava

Print Profile

0.2mm layer, 2 walls, 30% infill

(Edited)

Other Issues:The model does not show this huge useless part that is print on the side. spend more material on that than on the real part.

The designer has replied

@WingArt

The 'huge useless part' you mention is a cleaning tower, essential for clean colors and nozzle filling in prints. Giving a 1-star rating due to standard slicer settings that enhance the print is unfair and demotivating for designers who put effort into creating for users like you. The tower is evident when the file is loaded into the slicer.

(Edited)

@bernhard.haba

Hi Avalline - the problem is that only two caps were printed. If you print 100, the ratio is good again. Or, a very wild idea: you can deactivate the cleaning tower in the slicer. Made my day.

(Edited)

@edu.ava

Hello, understand the tower usage, but when the file is available maybe the tower could be configured to be smaller since there are only two objects. the problem is when you find the object in the app and send to the printer, this happens. I'll improve the rating but still think the file should be configured differently when made available.