If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

This is a novelty gold chain with removable magnetic faceplates!

Unfortunately, this print requires a brim for each chainlink. That means it will require some cleanup once the print is complete. The better the cleanup, the more comfortable the chain is to wear around your neck.

There are minimal supports required. They are painted on and included in the print profiles.

The magnet holes are TIGHT, very tight. This is on purpose so you don't need glue to keep the magnets secure. I ended up using a chisel and a rubber mallet to hammer the magnets in. As you can tell from the photo, I only needed 5 magnets for good sticking power. I used these specific magnets: (affiliate link) 4mm x 2mm circle magnets.

The hole in the bling plate is for pushing the faceplate out easily to swap them.

You can easily customize the faceplates for whatever you'd like. I have included 3 examples. The text was input using the Text feature in Bambu Studio. If you do want to make a customized one, please note the text's height at 0.20mm and the position of the text so it only prints on the first layer (saving filament since only 1 color change is needed!)

Disclosure: As an Amazon Associate, I earn from qualifying purchases.