This adaptor alows you to transform two zeno cages in one super spacious cage.

Zeno cages are a very popular option for small animals. But if you ever find that yours is too small for your pets, chance are you can find an other used one for a very low prince, and then you can double it with this ZENO CAGE EXTENSION ADAPTOR!

Instruction:
- Either print 2 halfs per corners and glue them together or print four of the whole ones.
- Remove the top mesh of one of the cage (it sould easily pop out if you push upward on the mesh's frame
- Remove the bottom from the other cage
- Remove the platic covers from the bottom of the frame to reveal a whole in every corners of the cage without a bottom.
- Insert the adapter in the holes of either cage
- Place the cage without a bottom on top of the one without a top. (Make sure the cage bars are correctly secured in the notches of the adapter)
-Secure the two cages together with rope or metal wire if you need to be able to lift it by grabbing the top part (optionnal)

Print settings:

Resolution : 0.28mm

Infill : At least 60%

Material : PLA