I AM THE PUMPKIN KING!!!!!!!
print was created using Night Cafe+Hueforge
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #20 (1mm) swap to Dark Brown
At layer #29 (1.36mm) swap to Gray
At layer #46 (2.04mm) swap to Ivory White for the rest.