Someone asked me to make this, so I did - here is the devilish satanic poop emoji!

This satanic poop emoji is based on my poop emoji model. There are separate solid, hollow and magnetic versions supporting either 5x2mm or 6x2mm disc magnets.

Printing

The hollow and solid versions are already scaled down to 25%, hence there is scope for making them much larger without losing quality. The magnetic version is already scaled down and not re-sizable without losing support for the magnets.

They are made to be printed directly on the print bed in normal orientation with no support. I used a 0.4 nozzle with a 0.2mm layer height for everything. The colours I have used in my print above are all Extrudr NX-2 matte colours - brown, grey and red.

Magnets

If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion.

The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

Versions

2023.11.20: Initial version.

Support

If you like our poop please consider joining our club on Printables!