I wanted to add a level to my Celestron Astromaster 130EQ telescope to assist in polar alignment. I believe this tripod is the CG-3, so any telescope that uses it should work.
The levels I used are 9.5mm diameter x 31mm long cylindrical level bubbles. We had them lying around so I don't know where to source them. They should just slide in with a stay with friction.
This piece goes between the tripod legs and the equatorial mount.
Printer Brand:
Creality
Printer:
Ender 3
Resolution:
0.2
Infill:
0%
Filament:Hatchbox PLA Orange
Notes:
0.4 Nozzle
5 Walls
I was able to print this without supports. There's a small bridge where the cylinders go. I was having issues printing this part fully cylindrical, which is why it's slightly square shaped here.